Dispensing nozzle is the last part where the adhesive is dispensing through the Hot Melt Applicator System, and the appropriate nozzle must be selected and applied.
In addition to the basic nozzles listed below, EGT can design and manufacture special nozzles according to customer circumstances.
| Nozzle Size | Scale(1:1) | HMA Injection length weight | HMA Weight injection length | |
|---|---|---|---|---|
| Side | Top | |||
| 1/32” (0.79mm) |  |
 |
4,031mm/g | 0.0248g/cm |
| 1/16” (1.58mm) |  |
 |
1,008mm/g | 0.098g/cm |
| 3/32” (2.38mm) |  |
 |
560mm/g | 0.178g/cm |
| 1/8” (3.18mm) |  |
 |
306mm/g | 0.297g/cm |
| 5/32” (3.97mm) |  |
 |
201mm/g | 0.496g/cm |
| 3/16” (4.76mm) |  |
 |
114mm/g | 0.876g/cm |
| 1/4” (6.35mm) |  |
 |
77mm/g | 1.294g/cm |
It is a nozzle in which the tip and the binding nut are integrally formed.
| Tip Orifice Size(mm) | Part Number |
|---|---|
| Φ0.3 | 3320003 |
| Φ0.4 | 3320004 |
| Φ0.5 | 3320005 |
| Φ0.6 | 3320006 |
It is a nozzle in which the tip and the binding nut are separated from each other, which is easy to maintain and can be manufactured in various lengths.
| Tip Orifice Size(mm) | Part Number |
|---|---|
| Φ0.3 | 3310003 |
| Φ0.4 | 3310004 |
| Φ0.5 | 3310005 |
| Φ0.6 | 3310006 |
It is a nozzle in which the module and the tip direction are vertical, and it can be fixed by rotating the nozzle direction.
 |
Single | 15˚ (2 Orifice) |
30˚ (2Orifice) |
45˚ (2Orifice) |
|---|---|---|---|---|
| Φ0.3 | 3331003 | 3332315 | 3332330 | 3332345 |
| Φ0.4 | 3331004 | 3332415 | 3332430 | 3332445 |
| Φ0.5 | 3331005 | 3332515 | 3332530 | 3332545 |
| Φ0.6 | 3331006 | 3332615 | 3332630 | 3332645 |
It is a nozzle that dispense in several orifice
 |
2 | 3 | 4 |
|---|---|---|---|
| Φ0.3 | 3340203 | 3340303 | 3340403 |
| Φ0.4 | 3340204 | 3340304 | 3340404 |
| Φ0.5 | 3340205 | 3340305 | 3340405 |
| Φ0.6 | 3340206 | 3340306 | 3340406 |
